Similar Products
Important Links
ICOM IC-V82 / IC-U82 144MHz VHF FM Transceiver

High Power! Digital Capability! Power to Go Anywhere!

ICOM 
IC-V82 / IC-U82 
144MHz VHF FM Transceiver
  • NOAA weather channel receive*

    *USA version only
  • Automatic repeater function*

    *IC-82 USA version only
  • Reversible control knob and up/down buttons assignment
  • Durable construction and simple operation
  • 16 DTMF dial memory
  • PC cloning capability

Optional digital unit, UT-118

The optional UT-118 provides D-STAR format digital voice and slow data communiation. The UT-118 includes the following digital features.

Callsign calling

In the digital mode, your callsign and the receiving callsign (or CQ message) are included in each transmission. The callsign squelch allows you to choose an incoming call selected by the callsign. Also, received callsigns are automatically stored in the memory.

Position exchange with external GPS receiver

When connected to an external GPS receiver*, position information can be exchanged with other stations. When the receiving side is connected to a PC**, position monitoring is possible.

* NMEA 0183 output and RS-232C interface are required.

** Position mapping software required (Not supplied by Icom ).

And more digital features

20-character short data message

  • Digital code squelch
  • EMR communication
  • Digital pocket beep
  • Stand-by beep

7W powerful output power

A powerful 7W* output power provides superior transmit power. All this power is available with the supplied battery pack. Reduced power settings also allow you to adapt to the communication conditions and provide longer operating time.

* 5W for UHF.

200 memory channels and 10 memory banks

Up to 200 regular memory channels can be stored with a 6-character channel name, tone and duplex settings. The memory channels can be tagged with A-J bank name and allows you easy channel management. In addition, use Icom’s exclusive DMS (Dynamic Memory Scan) system to scan selected memory banks by simply adding and deleting blank links.

Built-in CTCSS/DTCS

Built-in CTCSS/DTCS tone codes provide quiet stand-by and allow you to access a closed repeater. The pocket beep alerts you when a matched tone frequency is received. The tone scan detects the tone frequency used in the receiving frequency.

General
Frequency Coverage (unit: MHz)
VersionIC-V82IC-U82
USATx 144-148 Rx 136-174 *1Tx 420-450 *2 Rx 400-479 *2
Europe144–146430–440
Guaranteed Range *1 144-148MHz, *2 440-450MHz
ModeF3E, F2D, F7W *
*Optional UT-118 Required
Number of memory Ch.207 (incl. 6 scan edges and 1 call)
Operating Temp. Range-10°C to +60°C; +14°F to +140°F
Frequency stability±2.5 ppm (-10°C to 60°C)
Power supply requirement7.2V DC (6.0-10.3V DC aceptable; Icom's battery pack only)
Current drain (at 7.2V DC)
IC-V82IC-U82
TxHigh (7W/5W)2.6A2.0A
RxMax. audio Standby
Power Save
250mA 80mA 30mA250mA 80mA 30mA
Antenna impedance50Ω (BNC)
Dimensions (W×H×D) (Projections not included)54 × 139 × 37.5 mm; 2 1 / 8 × 5 15 / 32 × 1 7 / 16 in
Weight (approx.)390g; 13.8oz (w/ant. and BP-222N)
Transmitter
Output power (at 7.2V DC)
IC-V82 IC-U82

7.0/4.0/0.5W (High/mid/low) 5.0/2.0/0.5W (High/mid/low)
Spurious emissionsLess than -60dBc
Max. freq. deviation±5.0/±2.5kHz (Wide/narrow)
External Microphone connector3-conductor 2.5(d)mm ( 1 / 10 ") / 2.2kΩ
Receiver
Receive systemDouble conversion superheterodyne
Intermediate freq.46.35MHz/450kHz (1st/2nd)
Sensitivity (typical)0.16µV (typ.; at 12dB SINAD)
Squelch sensitivity0.11µV (typ.; threshold)
SelectivityMore than 55/50dB (wide/narrow)
Intermodulation65dB (typ.)
Spurious and image rejection80dB (typ.; VHF) 70dB (typ.; UHF)
Audio output power300mW with an 8Ω load
Ext. speaker connector3-connector 3.5(d) mm ( 1 / 8 ”) / 8Ω
Ext. Data connector3-connector 2.5(d) mm ( 1 / 10 ”)