Caps

Caps

Showing all 5 results

  • al cap2

    Aluminum Rebar Caps

    Surv-Kap's rebar caps feature a patented tapered internal hole which accepts most irregular-shaped rebar ends. Available for 1/2" and 5/8" rebar, and comes in 1 1/2" and 2".
    Read more

    Add to quote

  • al cap

    Aluminum Rebar Caps...

    Surv-Kap's rebar caps feature a patented tapered internal hole which accepts most irregular-shaped rebar ends. Caps with the plastic insert are only available for 5/8" rebar, and come in 2", 2 1/2", and 3 1/4".
    Read more

    Add to quote

  • Placeholder

    Aluminum Smooth Rod...

    Aluminum Smooth Rod Caps • Available for 5/8" and 3/4" smooth rods • 2 1/2", 2" and 3 1/4" • Magnet inserted inside caps
    Read more

    Add to quote

  • capGroup

    Plastic Rebar Caps

    Plastic rebar caps are designed to provide permanent identification for your surveys. Made of high quality polyethylene and will stand up to temperatures ranging from -40 to 150°F. The markers stand up to environmental factors such as weather, acids, salts, minerals, smog, and other chemicals. #3000 - for 3/8" rebar and fits into 1/2" pipe, available in yellow, red, orange #4000 - for 1/2" rebar and fits into 3/4" pipe, available in yellow, red, orange, pink #5000 - for 5/8" rebar and fits into 1" pipe, available in yellow, red, orange, pink #6000 - for 3/4" rebar and fits into 1 1/2" pipe, available in yellow, red, orange
    Read more

    Add to quote

  • thruhole-280x280

    Through-Hole Rod Monument...

    APPLICATIONS: The through-hole rod monument cap is designed for use on stainless steel sectional rod monuments. The finished monument may incorporate a grease filled sleeve and special back-fill around the upper few feet of rod. Additionally, an access cover and PVC pipe collar may be utilized. FEATURES: Installation is quick and easy. Identifies the monument and permits the most accurate and repeatable 3-D measurements possible. TYPICAL INSTALLATION PROCEDURE: The sectional rod monument is installed in the normal manner and driven to refusal or until sufficiently stable ground is reached. The rod is cut at the desired height and a datum is ground or filed on the end. A punch mark may also be made in the end at this time. The through-hole rod monument cap is placed on the upper end of the installed monument and is driven over the rod until the datum produced in tep two protrudes above the top of the cap. ADVANTAGES: Because all measurements are made from the end of the rod protruding through the cap, the errors resulting from the unauthorized removal of an attached datum or standard rod cap are eliminated. Further, the monument can be identified and other user information provided at the point without setting an additional monument marker.
    Read more

    Add to quote